Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved

Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.

Features & Benefits

• Dryrod Damp-Proofing Rods Next Generation DPC - The most effective form of damp proofing for walls; outperforms creams, gels or liquids. BBA approved.
• Fast & Simple to Install DIY rising damp treatment. Less messy than older traditional damp course injection creams or liquids
• No specialist equipment required - simply insert into 12mm holes in the mortar lines of a building to form a powerful waterproof barrier
• Exact Dosage - Delivers the correct dose every time eliminating guesswork
• BBA Approved: The High-Performance DPC Treatment is Certified by the British Board of Agriment to be effective against the ingress of moisture for at least 20 years
• Effective in both new (alkaline) and old (neutral) mortar

Technical Specifications

size	6m
type	Damp-Proof Rods
unit	each
colour	White
voc level	Minimal 0-0.29%
brand name	Dryzone
drying time	N/A
time to full cure	1 month
coverage per litre	10 m on 9" wall = 84 Rods
manufacturer model no	AM-DRYROD KIT 6M
interior or exterior use	Interior

Datasheets

• TECH Sheet 1 - Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
• TECH Sheet 2 - Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved