The Makita HR4013C/1 is a 110 volt SDS MAX Rotary Hammer Drill with low vibraton AVT technology, 8 joules of impact energy and 40mm capacity in Concrete
Features & Benefits
- One touch sliding chuck for easy bit installation and removal
- Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
- "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
- Unrivalled low level of vibration aided by vibration absorbing housing
- AVT Anti vibration technology
- LED service light indicates when to replace carbon brushes
- In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications
- Constant speed under load
- Torque limiter
Technical Specifications
| case | Yes |
| type | Rotary Hammer Drills |
| unit | each |
| voltage | 110 V |
| wattage | 1100W |
| includes | Side grip assy,latch,plastic case,side handle,grease,depth gauge,cloth,inner tray |
| brand name | Makita |
| chuck type | SDS MAX |
| power type | Corded |
| cable length | 5000 mm |
| no load speed | 500rpm |
| country origin | UNITED KINGDOM |
| blows per minute | 2900bpm |
| years guaranteed | 1 |
| manufacturer model no | HR4013C/1 |
| maximum diameter (masonry) | 40mm |
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent