The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
Features & Benefits
- Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate
- A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.
- Integral swing check valve which will prevent backflow of water from the discharge hose
- 25mm Outlet
- 170 litre per minute flow rate
- 11M head
Technical Specifications
| unit | each |
| brand name | Tsurumi |
| country origin | Taiwan |
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent