The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
Features & Benefits
- Built-in inspection slot at the base of the hanger to aid inspection from the ground
- Top flange provides widest area in contact with masonry support allowing superior performance.
- Embossments on JHM stiffen top flange and holes allow improved mortar keying.
- Safe working load for joists shot fired to steel girders is 5.17kN
- Made from pre-galvanised mild steel
- HM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.
- Masonry Supported 200mm, Joist Hanger
Technical Specifications
| type | Joist Hanger |
| unit | each |
| width | 146 mm |
| colour | Steel |
| finish | Galvanised |
| height | 190 mm |
| material | Pre-Galvanised Steel |
| thickness | 2 mm |
| brand name | Simpson Strong-Tie |
| made to order | N |
| pack quantity | 1 |
| range description | Builder Metalwork |
| manufacturer model no | JHM200/75 |
Datasheets
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent